Capitol Equipment
<< Back to Used




Receiving Hopper: heavy-duty, steel reinforcement of side plates, 5’9” x 15’8” top opening;


Vibrating Grizzly Feeder: 32” x 14’ lg, includes 60” tapered step grizzly of nominal 1-1/2” openings, 20 HP, 1200 RPM, TEFC, electric motor drive, mounted as integral part with hopper on common base;


Transition Hood: Consisting of a heavy duty fabricated feed chute with chain designed to accommodate vibratory-type feeding mechanisms and spraybar for dust suppression;


Horizontal Shaft Impactor: Eagle UltraMax 05 Primary/Secondary, Weight – 21,700 lbs., 33" x 32" feed opening, exclusive fixed bar solid steel sculptured rotor, cast primary curtain, fabricated secondary curtain with wear resistant replaceable liners, hydraulic shim adjustment on secondary curtain, crusher housing split with hydraulic opening for access to rotor, curtains and replaceable liners. Blowbar removal tool included for removing and flipping blowbars;


Spring Bridge: primary curtain spring bridge assembly where each spring exerts a compressive force for additional stabilization of primary curtain and still allows to swing away under extreme loads, such as uncrushables, with hydraulic adjustment.


Fines Bypass Chute: for diverting material to the under-crusher gathering hopper;


Under-Crusher Gathering Hopper: heavy-duty steel plate complete with full length rubber flashing and replaceable liners;


Plant Conveyor: 36” wide for transporting crusher discharge material to the 3-deck screen, 20º troughing idlers, high impact urethane/rubber slider bed in loading area, return rollers, 15 HP, 1800 RPM, TEFC, electric motor drive;


Vibrating Screen: 3-Deck Inclined Screen, Top Deck size is 4’x8’, Middle and Bottom Deck sizes are both 4’x12’, 20 HP, 1800 RPM, TEFC, electric motor drive, stroke setting adjustable by weights;


Return Conveyor: 18” wide plant mounted for return of oversize material back to the crusher, 20º troughing idlers, full length skirtboards, 4 HP, motorized head pulley, top 1/4 is hydraulic retraction for operation and travel;


Top & Middle Cross Conveyor: for discharge of top two decks of material to the return conveyor with troughing idlers and 4 HP motorized head pulley;


Bottom Deck Discharge Conveyor: for discharge of bottom deck material;


Screen Fines Conveyor: 42” wide for discharge of bottom deck fines to the front of plant, 20º idlers, under-screen gathering hopper with full length rubber flashing, steel plate discharge chute for transfer of material to radial stacker, 10 HP, electric motor drive;


Grizzly Cross Conveyor: 18” wide x 22’ 9” Lg., for discharging grizzly bypass material to side of plant, 45° troughing idlers, 4 HP, motorized head pulley, chute extension with flop gate;


Platforms and Railings: structural steel frame with expanded metal floor, platforms and railings located at the crusher, engine, and hopper for operation;

Subject to prior sale: "AS IS, WHERE IS".



<< Back to Used