Capitol Equipment
NewEagleFintecCemcoApplicationsContactUsed
<< Back to Used

2017 EAGLE 500-05 CV PORTABLE CRUSHING PLANT


2017 EAGLE 500-05 CV PORTABLE CRUSHING PLANT   HOURS: +/- 500

Receiving Hopper: heavy-duty, steel reinforcement of side plates, 6'2" x 16'2" top opening;

Vibrating Grizzly Feeder: 32" x 16' lg., includes 60" tapered step grizzly of nominal 1-1/2" openings, 20 HP, 1200 RPM, TEFC, electric motor drive, mounted as integral part with hopper on common base;

Transition Hood: Consisting of a heavy duty fabricated feed chute with chain designed to accommodate vibratory-type feeding mechanisms and spraybar for dust suppression;

Horizontal Shaft Impactor: Eagle UltraMax 05 Primary/Secondary, Weight- 21,700 lbs., 33" x 32" feed opening,

Spring Bridge:

Fines Bypass Chute: for diverting material to the under-crusher gathering hopper;

 

Under-Crusher Gathering Hopper: heavy-duty steel plate complete with full length rubber flashing

and replaceable liners;

Discharge Conveyor: 30" x 31'6" lg.,

Platforms and Railings: structural steel frame with expanded metal floor, platforms and railings located at the crusher, engine, and hopper for operation;

Main Trailer Frame: 18" wide flange beam side rails, air ride tri-axle suspension with 77.5" track axles, twelve 11:00 x 22.5 14-ply tires, air controlled brakes with emergency and service gladhands, fifth wheel plate and kingpin, prewired running lights with stop, directional and 3 light marker bar;

Hydraulic Lift/Leveling:

 

Drive Guards: formed sheet metal with wire mesh, complete with hinge type doors for easy access to pulleys and belts;

Central Control Panel: NEMA 4 type box, plant mounted complete with all motor controls, emergency stop pushbuttons, two 15 HP starters with quick disconnect plugs for radial stackers, and one dual 115 volt plugRemote operator's pendant with feeder stop and emergency stop pushbuttons;

Electric Variable Speed Feeder Control:

 

Remote Feeder Stop: remote control for stopping feeder.

Tier 3 Diesel Power: 225 HP @ 1800 RPM, electronic controlled governor, emergency shutdown system for low oil pressure, overspeed and high temperatureone 125 gallon fuel tank.

Generator:   Generator Enclosure:

Magnetic Separator: Dings Model 33CR continuous belt magnet with stainless steel clad discharge belt, 5 HP, 1800 RPM, TEFC, electric motor drive, magnet rectifier converts AC voltage to DC voltage. (Cross Belt)

System Startup - U.S.: An Eagle Service Technician will be onsite to assist with the unit startup and to train your plant personnel for a period not to exceed two (2) days.

NOTE  :     TWIN DISC STYLE CLUTCH

"OLD STYLE" PUSH BUTTON PANEL

START/STOP STATION UP ON OPERATOR'S PANEL

Subject to prior sale: "AS IS, WHERE IS".

PRICE FOR ABOVE F.O.B. NEW JERSEY.....$355,000

<< Back to Used